|
BB1279 FULL MORTISE STEEL HINGE |
Our most popular hinge! |
Ball bearing - recommended for doors with closers
Standard weight
For use on medium weight doors requiring average frequency of service
Fire-rated doors
Options:
ETW
NRP
HT
RC - 1/4" & 5/8"
Other sizes available |
SIZE |
GAUGE |
FINISHES |
3-1/2" x 3-1/2" |
.119 |
US3, US4, US10, US10A, US26D |
4" x 4" |
.129 |
US3, US4, US10, US10A, US26D, USP |
4-1/2" x 4-1/2" |
.134 |
US3, US4, US10, US10A, US26D, USP |
1279 FULL MORTISE STEEL HINGE |
|
Plain bearing
Standard weight
For use on medium weight doors requiring average frequency of service
Template
Options:
ETW
NRP
HT
RC - 1/4" & 5/8"
Other sizes available |
SIZE |
GAUGE |
FINISHES |
3-1/2" x 3-1/2" |
.119 |
US3, US10, US10A, US26D |
4" x 4" |
.129 |
US3, US10, US10A, US26D, USP |
4-1/2" x 4-1/2" |
.134 |
US3, US10, US10A, US26, US26D, USP |
BB1168 FULL MORTISE STEEL HINGE |
|
Ball bearing
Heavy weight
For use on heavy doors requiring high frequency of service
Fire-rated doors
Options:
Stainless Steel US32D
Order: BB1199
ETW
NRP
HT
RC - 1/4" & 5/8"
Other sizes available |
SIZE |
GAUGE |
FINISHES |
4-1/2" x 4-1/2" |
.180 |
US26D, USP |
5" x 4-1/2" |
.190 |
US26D, USP |
5" x 5" |
.190 |
US26D, USP |
BB1129 HALF MORTISE STEEL HINGE |
|
Ball bearing
Standard weight steel hinge
For use on hollow metal doors with channel iron frames
Medium frequency service
Options:
NRP
HT
Heavy Weight Model (.180 gauge) Order: BB1138 (US26D, USP)
Stainless Steel - US32D Order: BB1109 standard; BB2098 heavy weight |
SIZE |
GAUGE |
HOLES |
FINISHES |
4-1/2" |
.134 |
7 |
US26D, USP |
5" |
.145 |
8 |
US26D, USP |
BB1191 FULL MORTISE BRASS HINGE |
|
Ball bearing
Standard weight brass hinge with stainless steel pin with brass head
For use on medium weight doors
Medium frequency service
Options:
NRP
HT
Brass - US3 Order: BB1191 |
SIZE |
GAUGE |
HOLES |
FINISHES |
4-1/2" |
.134 |
8 |
US26D, USP |
5" |
.145 |
8 |
US26D, USP |
BB1199 FULL MORTISE STAINLESS STEEL HINGE |
|
Ball bearing
Heavy weight steel with steel pin
For use on heavy weight doors
High frequency service
Options:
NRP
HT
Stainless Steel - US32D Order: BB1199 |
SIZE |
GAUGE |
HOLES |
FINISHES |
4-1/2" |
.134 |
8 |
US26D, USP |
5" |
.145 |
8 |
US26D, USP |
| When ordering hinges, complete dimensional information is necessary to specify the correct material, size, type and optional features. |
| OPTIONS: |
To order options shown below, add suffix to model number: for example: BB1279 ETW
include size, for example: 4-1/2" x 4-1/2"
and finish: for example: US3
and quantity desired, for example: 27
|
 
Electric Through Wire (ETW-4) |
Concealed Electric Through Wire Hinge
Provides 4 continuous electric conductors for transfer of current or signals from frame to door
Full mortise ball bearing, standard weight and heavy weight
Low voltage electric transfer capabiity for passing power to electrified locks, electrified exit device trim, electrified latch-retracting exit devices, and any application where low voltage power must be transferred from the hinge jamb to the door
Available in 4" x 4"; 4-1/2" x 4", 4-1/2" x 4-1/2"; 5" x 4-1/2"; 5" x 5" and 6" x 6" sizes
Also available in two, six and eight wire configurations; specify:
ETW-2, ETW-6, or ETW-8
Non-removable pin not necessary
|
 Radius Corners (RC) |
1/4" full mortise round corner hinge is usually used by aluminum door manufacturers and routers in the field5/8" round corner is usually used by pre-hung door manufacturersAvailable in 4-1/2 x 4"; 4-1/2" x 4-1/2"; 5" x 4-1/2"; 5" x 5" and 6" x 6" sizes
|
 Non-Removable Pin (NRP)
|
Small set screw in the center knuckle of the hinge pin barrel anchors into a groove in the hinge pin and adds security to hinge
Available in 4-1/2 x 4"; 4-1/2" x 4-1/2"; 5" x 4-1/2"; 5" x 5" and 6" x 6" sizes
|
 Hospital Tip (HT) |
| Barrel ends are sloped, making cleaning easier, and making it difficult to attach rope, wearing apparel, etc. to hinge. |
| |
| FINISHES: |
| US3 |
Bright Brass |
| US10 |
Dull Bronze |
| US10A |
Antique Bronze |
| US26 |
Polished Chrome |
| US26D |
Satin Chrome |
| USP |
Prime Coat |
|
ANDERSON LOCK
800-323-LOCK [5625]
|
|
