FM-300 FULL MORTISE CONTINUOUS STEEL HINGES |
For industrial, medical, retail & institutional fire doors
 |
|
- Supports doors up to 600 pounds, 4'0" maximum door width
- UL fire rated label for hollow metal and wood fire doors
- Nylon bearings14 gauge stainless steel
- 1/4-inch diameter stainless steel pin
- No exposed screws or fasteners
- Surface applied - ideal for retrofit
- Provides maximum door support
- All fasteners supplied
- Draft-proof1/8" offset
|
Other models not shown:
FS-301
Full Surface Hinge
FS/SC-309
Full Surface / Swing Clear Hinge |
Standard lengths:
83" 7'0" door
95" 8'0" door
119" 10'0" door
(specify when ordering) |
MARKAR EDGE GUARDS |
 |
 |
EG 308 |
EGT 308 |
|
Heavy duty
16 gauge 304 stainless steel
Finish:
US32D satin stainless steel (630)
Mounting hardware:
No exposed mounting fasteners when closed
Sizes:
6' 8", 7' 0", 7' 2", 8' 0", 10' 0"
Hole pattern:
Symmetrically templated, non-handed
Door edge:
Specify square or beveled edge when ordering
EG 308: This fire labeled edge guard is used
in conjunction with the HG-305 hinge / guard
for a balanced aesthetic look. It also protects
the leading edge of the door.
The integral overlapping astragal of the
EGT-308 provides an additional level of
security by acting as a latch protector. It is
ideal for exterior pairs or doors which require
protection from vandalism. |
|
Option: Electrical Modification
Current Transfer Prep
(frame leaf only)
Suffix "CTP" when ordering
Other Options:
Hospital tip Prefix HT
Custom holes (Send diagram)
Lead Lined: Suffix LL (Surface mount only)
Security studs (Specify on order) |
| FINISH |
| US32D |
Stainless Steel |
|
|
 |
All Markar hinges come with
UL fire-rated label as standard |
 |
Standard lengths:
83" 7'0" door
95" 8'0" door
119" 10'0" door
(specify when ordering)
Shown with shim and astragal,
ask about them when ordering
Options:
Hospital tip Prefix HT
Custom holes (Send diagram)
Lead Lined: Suffix LL (Surface mount only)
Security studs (Specify on order) |
MARKAR HS-303 HALF SURFACE CONTINUOUS STEEL HINGES |
Excellent for retrofit, it fits into the gap left after standard butt hinges are removed.
It can assist in reversing the handing of a door, or to reverse the swing of a door hung in an evenly-rabbetted frame. |
|
Half-surface pin and barrel hinge
- Supports doors up to 600 pounds; 4'0" maximum door width
- UL fire rated label for hollow metal and wood fire doors
- Nylon bearings
- 1/4-inch stainless steel pin
- No exposed screws or fasteners
- Surface applied - ideal for retrofit
- Provides maximum door support
- All fasteners supplied
- Draft-proof
- 1/8" offset
|
All Markar hinges come with UL fire-rated label as standard |
|
|
|
