RL32
Roller Latch
• Fits heavy-duty cylindrical lock mortise, easily adjustable
• Bronze or stainless steel with silent action nylon roller
• Normal closing of door engages roller in groove on strike, holding door shut
• 2-3/4" x 1-1/8" strike provided
ASA 4-7/8" strike available, Order: STK726
For replacement roller pin, Order: 32-5
For brass roller with nylon dover, Order: 32F

SR64
Door Silencers
• For metal frames
• Pneumatic design forms air pocket to absorb shock and reduce noise of door closing
• Tamper-proof once installed in frame
• Proper installation also eliminates door rattle and provides constant tension for door latches or locks
• Gray color; packed 100 in bag

SR66 (not shown)
• For wood or metal door frames
• Self-adhesive rubber silencers
• Economical instllation: no drilling required
• Brown, gray or white; packed 100 in bag

262
1" throw flush bolt
• Polished cast brass
• Smooth working, high quality flush bolt
• Double-action spring design provides atomatic holding of brass bolt in projected or retracted position
• Deep-cut finger hole
• Extra-long lip permits application in a variety of door styles
• Available in B3, B10, B10B, B26 and B26D

264
3/4" throw flush bolt

265
1" throw flush bolt
• Polished cast brass
• Smooth working, high quality flush bolt
• Double-action spring design provides atomatic holding of brass bolt in projected or retracted position
• Deep-cut finger hole
• Extra-long lip permits application in a variety of door styles

FB31P
Automatic Flush Bolts for Metal Doors
For labeled metal fire doors up to 3 hours and 9-ft height

FB41P
Automatic Flush Bolts for Wood Doors
For labeled wood fire doors up to 1-1/2 hours and 8-ft. height

• Install at top or bottom in the inactive leaf of a pair of coordinated doors
• Inactive leaf must close first, active leaf then closes, depressing trigger which actuates bolt linkage assembly, securing inactive door
• When active leaf is opened, bolts retract automatically, and inactive leaf is free to open
• Doors must be equipped with a coordinator
1/2" bolt head diameter
• Specifically designed for installation in openings where the inactive leaf is not required for exit purposes
• Sold as non-handed pair, consisting of 1-LH and 1-RH bolt (If ordering single replacement, specify right or left hand.)

DP1, DP3
Dust Proof Strikes
• Recommended to prevent dirt build-up assuring full engagement of bottom bolt
• For use with extension flush bolts up to 5/8" diameter round or 1/2" square
• US26D satin chrome finish

FB257N, FB258N
Manual Flush Bolt for Metal Doors

FB358
Manual Flush Bolt for Wood Doors

FB457, FB458
Manual Flush Bolt for Fire-rated Doors
• Secures inactive leaf of a pair of doors when active door is provided with a single point latch
• Solid brass or aluminum
• For metal or wood doors
• UL listed for use in labeled fire doors up to 3 hours and 8-ft. in height
• 12" rod length standard; 24" available for 8-ft. doors
• May be installed to lock at threshold or at header
• 2-1/2" 15/16" strike included
• Non-handed

Sliding Door Pulls
• Polished wrought brass
• Ideal for louvered, bi-folding or wardrobe doors
• Easy to install; built-in prong design eliminates need for screws or brads

22
Flush Pull
• Extra deep recess for good finger grip
• Reverse tapered grip for ease of pulling
• Low profile
• 1-5/16" x 3-1/8"

230
Sliding Door Edge Pull
• 3/4" width allows installation on narrow as well as standard doors
• Spring automatically returns lever flush with plate
• Ideal for pocket doors
• 3/4" x 3-7/8" x 1-5/8" deep