 |
| DOOR PULLS AND PUSH PLATES |
|
Contemporary design push and pull bars available in all architectural finishes
Standard mounting hardware available for wood, metal and glass doors
3/4" and 1" diameter solid bar construction
"PUSH" or "PULL" engraving available as an option |
|
| |
| MODEL |
|
PULL |
CTC |
PLATE |
SIZE |
| 106X70B |
|
3/4" dia. |
6" |
70 |
3.5" x 15" |
| 107X70C |
|
3/4" dia. |
8" |
70 |
4" x 16" |
| 125X70B |
|
1" half round |
6" |
70 |
3.5" x 15" |
| 125X70C |
|
1" half round |
6" |
70 |
4" x 16" |
CTC = Center to Center |
10" CTC available |
|
|
| MODEL |
|
SIZE |
| 70B |
3.5" X 15" |
| D70B |
3.5" X 15" |
| 70C |
4" X 16" |
D70C
Drilled
Push Plate |
|
4" X 16" |
.050" thick
Four beveled edges with square corners
Phillips oval head sheet metal screws
D = Drilled for back to back or thru bolt mounting
6" CTC standard; 8" and 10" available
1/4" holes |
|
|
|
Recommended door location: 42" from finished floor to centerline of pull or bar. Hospital arm pulls, however, should be located somewhat higher, at 45" to the base of the lower mounting leg.
| FINISHES FOR DOOR PULLS AND PUSH PLATES: |
| US3 |
Bright brass |
| US10 |
Satin Bronze |
| US10B |
Oil rubbed bronze |
| US26 |
Bright chrome |
| US28 |
Aluminum |
| US32D |
Stainless steel |
|
| STANDARD DOOR PULLS |
MODEL |
DESCRIPTION |
CTC |
MOUNTING |
90 |
Cylinder pull |
-- |
Surface |
94 |
Flush pull |
-- |
Surface |
111 |
1" diameter |
10" |
Thru bolt |
125 |
1" half round |
6" |
Thru bolt |
126 |
1" half round |
8" |
Thru bolt |
130 |
Cast pull |
5-1/2" |
Thru bolt |
131 |
Cast pull |
-- |
Surface |
193 |
Hospital style |
-- |
Surface |
CTC = Center to Center |
|
|
| Mounting Diagrams: |
 |
|
|
