VERTICAL ROD & LATCH GUARD
Protect vertical rods from damage caused by carts or wheelchairs

RG-27

 

• Provides smooth surface so door can be pushed open easily with bumpers of wheelchair

• Handed - specify LHR or RHR

• Aesthetically pleasing, no exposed fastener on rod guard

• Latch guard covers latches up to 1-1/4" W x 10" H x 1-7/8" D

• Stainless steel finish (US32D)
REMOVABLE MULLIONS
KR4954
FINISHES:
SP28 Sprayed Aluminum
SP313 Sprayed Dark Brown

Mullions provide single door performance and security in double door openings with rim devices. Easy to remove and replace.

KEYED REMOVABLE STEEL MULLIONS:
• Lock assembly is available for standard and fire labeled steel mullions
• Can be retrofit on existing applications
• Easy to remove when needed to allow large equipment or furniture to pass through opening
• Unit self-locks without use of key when re-installed
• Fits doors up to 8'0"
• Operated by standard 1-1/4" or 1-1/8" mortise cylinder
(not included, order separately)
Mullion stabilizers available

050335
Top fitting and cover

 

4954
Removable steel mullion

 

050390
Bottom fitting

REMOVABLE STEEL MULLIONS
Mullions are shipped presized, with mounting screws and prepared for strikes

• Removable by loosening bottom set screw and removing top fitting cover

• Standard sizes: 7'2", 8'2" & 10'2"
FINISHES:
SP28 Sprayed Aluminum
SP313 Sprayed Dark Brown
MODEL DESCRIPTION
4754 For two 4263 monitor strikes
4854 For one 299 strike and one 6111 electric strike (handed)
4954 For two standard 299 strikes; for use with all Von Duprin rim devices
9954 For fire label doors; for two strikes (268 / 499F); 7-ft. & 8-ft. only; special fittings
FINISHES:
US28 Aluminum anodized
313AN Dark bronze anodized
REMOVABLE ALUMINUM MULLION

• Removable by loosening bottom screws and top clamp

• Standard sizes: 7'2", 8'2" & 10'2"

050335
Top fitting cover

5754
Removable aluminum mullion

050190
Bottom fitting
ACCESSORIES FOR EXIT DEVICES

DOG KEYS

227 (standard) 5/32" hex

222 (old style) 7/32" hex

Use to hold latchbolt in retracted position for push / pull operation of door

Reduce wear on latchbolt

CYLINDER DOG KIT

33/99 CDK


Available for 33 and 99 Series devices to replace standard hex key dogging

Unit requires standard 1-1/4" mortise cylinder (order separately)
EXIT ALARM KIT

22/33/99 ALK 2/33/99 ALK

 

Includes warning decal
Allows monitoring of exit
Internal horn & LED indicator
S1 switch standard; S2 optional
1-1/4" mortise cylinder required (order separately)
Specify finish

POWER SUPPLIES

PS871
12VDC / 24VDC for Chexit

PS872
24VDC for EL devices

Designed to work with exit devices equipped with electrical locking or monitoring options

Steel box: 5-7/8" x 12-1/2" x 5" D

MONITOR STRIKES

4263

Use with Von Duprin exit devices and most other exit devices, mortise and cylindrical locks
Provides remote door monitoring through use of signal switch mounted in the strike
Specify switch type: T1-T3
Locks and chains don't meet fire regulations because they make it virtually impossible for someone trapped inside a building to get out. Security Latches secure panic doors yet still allow exit without use of keys or combinations.
1100
Single Left Door Latch
Rests firmly against door jamb.
1200
Single Right Door Latch
Rests firmly against door jamb.
4000
Double Door Latch
Rests firmly against the center post.
2000
Double Door Latch
Rests firmly against the center post.
2100
Double Door Latch
for doors without a center post.
4001
Double Door Latch
for doors without a
center post.

Security Latch is intended for unoccupied use only

Security Latch is a simple, safe and secure method for adding extra security to Panic Doors in schools, auditoriums, buildings and factories.

Security Latch has the unique ability to secure panic doors tightly. Yet it allows immediate exit without the use of keys, combinations, or tools.
Security Latch is SIMPLE, SAFE, and SECURE.
Designed for most rim design panic hardware. Please specify models and sizes of existing hardware when ordering.

All steel cross arm with 1/4" x 1" steel bottom leg brace
Scratch resistant plastic covering
Simple to put on and lift off
Fits snugly on most panic doors
Stops unwarranted entry

Back to Top

Convenient device to hold panic bars in open position. Great for retrofit when you can no longer "dog down" exit device.

D-100
For Von Duprin panic hardware
Round bar design

D-200
For Dor-O-Matic panic hardware
Oval bar design

WARNING:
Use on fire doors is prohibited by law.

FINISHES:
A
Polished Aluminum
G
Brass

 

 
Keeps door unlocked during heavy use
Pushbutton release
Reduces wear on door locking mechanism
Adhesive available for glass door application To Order: Suffix T
Locking mechanism To Order: Suffix L
Other models and finishes available